BFGGM - DR039 FLAT ACRYLIC LACQUER #37038
- MSDS: BFGGM
- Manufacturer: NATIONAL AEROSOL PRODUCTS(DIST)DEVOE AND RAYNOLDS(MFR)
- Product Name: DR039 FLAT ACRYLIC LACQUER #37038
- National Stock Number: 8010-00-582-5382
Product Identification
Product ID:DR039 FLAT ACRYLIC LACQUER #37038
MSDS Date:01/01/1985
FSC:8010
NIIN:00-582-5382
MSDS Number: BFGGM
Responsible Party
LOS ANGELES, CA 90021-2843
US
Cage: 5N005
Contractor
Cage: 5N005
Ingredients
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 2.90%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 24.0%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ISOBUTYL KETONE (SARA III)
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: 21.0%
OSHA PEL 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 19.0%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 7.0%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
Hazards
Effects of Overexposure:INHAL:HEADACHE,NAUSEA,DIZZINESS,SKIN
CONTACT:PROLONGED OR REPEATED CONTACT MAY CAUSE IRRITATION.
First Aid
First Aid:INHAL:MOVE TO FRESH AIR.SKIN CONTACT-FLUSH W/LG AMOUNTS OF
WATER.REMOVE CONTAMINATED CLOTHING.EYE CONTACT-FLUSH W/CLEAN WATER
FOR AT LEAST 15 MIN.CALL PHYSICIAN.
Fire Fighting
Flash Point:43 F PMCC
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS TO BE WORN
BY FIREFIGHTER
Unusual Fire/Explosion Hazard:WATER SHOULD BE USED TO COOL CONTAINERS
EXPOSED TO FIRE
Accidental Release
Spill Release Procedures:AVOID BREATHING VAPORS,EXTINGUISH IGNITION
SOURCE IN IMMEDIATE AREA.AVOID CONTACT W/LIQUID -MFR RECOMMENDATION
Handling
Handling and Storage Precautions:DO NOT STORE AT ELEVATED TEMPERATURES
Other Precautions:CLOSE CONTAINERS AFTER USE
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR DEVICE IN
CONFINED AREAS.
Ventilation:SUFFICIENT LOCAL EXHAUST TO KEEP CONCENTRATION BELOW TLV
Protective Gloves:SOLVENT RESIST
Other Protective Equipment:NORMAL PROTECTIVE CLOTHING
Supplemental Safety and Health
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:176-343F
Spec Gravity:1.04
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT
Appearance and Odor:BLACK,MOBILE LIQUID CONTAINING VOLATILE SOLVENTS.
Percent Volatiles by Volume:82.9
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS,SOFTENS RUBBER
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE
Disposal
Waste Disposal Methods:DISPOSE OF IN CLOSED CONTAINERS AWAY FROM
IGNITION SOURCES.-MFR RECOMMENDATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.